25 ft sailboat plans

or

- WOOD EPOXY

RETURN TO  HOME PAGE

Sailboats embody the mystery of the sea, of going only where the wind is willing to take you. We offer a variety of sailboat sizes, using several construction techniques. We offer sails, hardware and rigging for many of our sailboat designs. This enables you to focus on building your boat, not searching around for all the bits and pieces needed to complete the project.

Free online book: 

• Rigging Small Sailboats
• Sailboat Hardware Notes

Glen-L 25 - Plywood

• About Modern Wooden Boats
• Tips & tricks
• What’s inside a boat plan ?

Idea 21 sportboat

The development of the family of small offshore capable sailboat plans : chined hull for the highest stability, vertical lifting keel, trailerable, suitable for club racing or cruising (two interior versions) ,  plywood and epoxy hull with the radius chine system, sparkling performances while sailing and reasonable interiors for coastal cruising.

First boat launched : read the first impressions here

Idea 21 small sailboat plan is the latest development of my family of small plywood & epoxy sailboats plans for homebuilders : it was quite a time since i was thinking of an evolution of her smaller 19 footer sister, so i finally take the decision to publish this new plan. the goals of this plan is simple: add interior volume, simplify the work for homebuilders switching to a complete plywood & epoxy radius chine hull, enhance slightly the sparkling performances of idea 19, keeping the sailboat very balanced and suited for sailors ranging from enthusiast beginners to experienced seamen., first boat launched and several other boats in building stage make idea21 the most sparkling project on our catalogue,  hull: chined hull on a small light sailboat has a simple reason to exist: it gives more stability to the sailboat when heeled, much more than a round hull similar sailboat. i managed to keep a very low wetted area of the unheeled hull, in order to achieve a good pace in light air and avoid excessive drag. stern sections are quite flat to gain speed downwind (idea 19 has been clocked with speed steadily in excess of 15 knots)., bow sections: experiences on racers showed that “knife-blade” bows may give you less resistance, but the price to pay is high in terms of buried bow sailing downwind, so i decide to provide this plan a large u-shaped section on the bow ; sails provide the sailboat plenty of power to defeat the small amount of added drag., sailplan: i have a very good starting point with idea 19, so we’re doing small adjustments and no revolutions: square top mainsail, 7/8 fractional rig , very wide single swept spreaders, no backstay, deck stepped mast with sturdy section, 110 % j jib, code zero, jennaker hoisted on swinging retractable bowsprit, and a good amount of sail area., keel and ballast: idea21 have a solid hard wood cored & unidirectional glass epoxy laminated lifting keel, with a naca optimised profile and a low resistance hydrodynamical shaped 280 kg lead bulb bolted on the keel tip; it can be made by a homebuilder, no need for professional welder; the fin area is on the low side, speed will help generating the required lift without adding too much drag. keel case is in 20 mm thickness plywood and epoxy laminated glass reinforcements, and it’s perfectly waterproof while sailing., full lifting keel  version : after a request from a builder, idea 21 cruise is available in a version featuring an integral watertight keel case running form hull bottom to cabin top panels, this feature called flk (full lifting keel) will allow the boat to sail with keel partially raised or to motor with keel totally up, a good option if you sail in shallow waters frequently., cockpit: was one of the strongest point in idea19, we simply keep the same arrangement and dimensions, so we have a really huge area for the crew and a simple and sturdy building in plywood panels epoxy glued on a structure of bulkheads and stringers., interiors: here i focussed on several upgrades; i decided to split the project in two versions (so two different sets of plans, you have to specify on order), “sport cruise” or “racing” ; both versions have 4 berths, a classic v berth on bow and two quarter berth after; in the cruising version cabin is 55 cm longer, giving wider interiors, enough room for a separate toilette and more comfortable after berths ; in the racing version we have a marine toilet (there’s room for a jabsco compact one) under the bow v-berth; cabin height is 1.65 m in both versions. interiors plywood panels are detailed on plans., taking advantage form the first season of sailing, i can now say that i strongly advice the cruise version as long as you are not going to run a sailing school, thus needing extra space in the cockpit., wooden rig: starting form summer 2019 we deliver two extra drawings with the plans, both for race and cruise version,  describing how to build a wooden rig suited for this boat.  keep your budget low at the price of a small extra weight , how to build the boat: we chose the plywood & epoxy resin “radius chine” system, as for petrel 28 and hirundo 750, so the hull planking is in okume marine grade plywood ; planking the hull is quite fast , and the internal structure of the boat is made by plywood bulkheads, floors and solid wood longitudinal stringers, all glued with epoxy and strengthened with epoxy laminated glass tape, assembled on a cheap wood scaffold, keeping the hull light, sturdy and quite easy to build for homebuilders ; the goal is to keep the total weight of the 19 footer, raising the ballast fraction of the sailboat at the same time. here are a couple of pictures of the first planked hull perfectly showing the radius chine planking system.

a HUGE Thanks to Nils Theurer    ([email protected])   for the awesome pictures taken during the first sea trials  

Plans availability: Plans are available in italian and english. Plans are available in imperial units upon request (send me a mail before purchase).

Sailboat Plans

Sailboats are well represented in the Devlin family.  Sam’s son Cooper owns a 17 foot Eider.  His son MacKenzie sails a 15 foot Nancy’s China having sold his 12 foot Mudpeep  which was built by our master builder Joel.  Lee, our office manager, has the 15 foot Egret he built at the shop and he also has a 22 foot Arctic Jaeger schooner which he bought after Cooper found it for him on Craig’s list.  Sam built the Red Schooner in 1981.  And yes, Sam and Soitza Devlin own an about to be launched Marsh Wren 20.  Its new sails just arrived last week.

What does this mean for you?  Could you be in better hands for realizing your dream sailboat?  From 8 feet to 28 feet, from day sailer to blue water cruiser, we have a wonderful selection of sailboat construction plans for you. 

Plans come in two basic flavors: Study Plans and Construction Plans. Study plans are inexpensive and give you the opportunity to examine  a detailed scale drawing of the design. Construction plans are vastly detailed and can lead you through the entire build of a boat. The price varies with the complexity of the design. There are boats that exist as study plans only, and the reason is that the development of a full set of construction plans can take hundreds of hours. If you see a boat that you would like to see developed, be sure to talk to Sam.

Available as full construction plans

Sandpiper 8 Plans

Guppy 9 Plans

Mud Peep 12 Plans

Duckling 14 Sail Plans

Zephyr 14 Plans

Egret 15 Plans

Linach 15 Plans

Nancy’s China 15 DC Plans

Nancy’s China 15 Plans

Eider 17 Plans

Lit’l Coot 18 Bilge Keel Plans

Lit’l Coot 18 Full Keel Plans

Sea Swift 19 Plans

Winter Wren 19 Full Keel Plans

Winter Wren II 19 Dagger Keel Plans

Wompus Cat 19 Plans

Lichen 20 Plans

Marsh Wren 20 Plans

Song Wren 21 Plans

Arctic Tern 23 Plans

Sooty Tern 25 Plans

Means of Grace 28 Plans

Onyx 28 Plans

Available as study plans only.

Curlew 24 Plans

Kestrel 26 Plans

Kokanee 36 Plans

Peregrine 36 Plans

Hope of Glory 38 Plans

Josephine 40 Plans