digital yacht ais nomad

You are using an outdated browser. Please upgrade your browser to improve your experience.

Digital Yacht Nomad Portable AIS Transponder

Sorry this item is no longer available

Ask a question

• Description
• Availability
• Delivery & Returns

A compact portable Class B AIS transponder with a wireless and USB interface built in for tablets and PCs. It appeals to charter skippers, professional mariners like delivery skippers and pilots as well as boat owners who don’t want the hassle or cost of installing a dedicated transponder and like the concept of easy iPad and tablet navigation using their favourite charting apps with a detailed AIS overlay and real time GPS positioning. The GPS is built in and Nomad ships with a compact, 25cm external VHF antenna with sucker cup mount. It can also connect to any regular VHF antenna. WiFi and USB interfaces are standard and there are a wide range of free and premium compatible apps for iOS, Android, PC and MAC. The wifi connection allows up to 7 tablets or iPads to connect.

• Applications include charter and delivery skippers, pilots, tenders and back up for main systems
• Can be utilised as AIS/GPS receive only
• Powered via USB – connect to PC, USB outlet or USB battery pack for power
• Wireless interface for iPad, tablet or PC/MAC
• Built in high performance GPS
• Supplied with portable VHF antenna with sucker cup mount
• Can be used as AIS receiver only (if no MMSI programmed) or if silent mode selected
• Programmable via PC, Mac and app

This item is currently not in stock but is available to preorder, with a lead time of up to 14 days.

This item has been discontinued and is not available to purchase.

Royal Mail Service Update:  Please be aware when choosing Royal Mail as your preferred delivery method, your delivery time may be impacted by ongoing strikes and may take up to 20 working days. If your order is time critical we suggest choosing a courier or Next Day Service

Our Mail Order team ship chandlery, yacht parts and sailing clothing around the world. We use the best value couriers available, and we will endeavour to get your products to you as quickly and as cost effectively as possible.

International Orders : Due to delays we have had to suspend our international delivery options. 

UK Standard Delivery

• UK Mainland 0 - 2Kg (small jiffy) £3.95 Royal Mail Service. Despatch within 3- 5 working days, delivery in 7-10 working days for orders under £50.00
• UK Mainland up to 25Kg £5.95 Courier service with signature. Despatch within 3- 5 working days, delivery in 7-10 working days
• UK Mainland 25Kg+ Price on request
• UK Mainland Next Day 0 - 25Kg £9.95 Courier service with signature, orders must be placed before midday
• Northern Ireland, Highlands & Islands 0 - 2Kg (small jiffy) £3.95 Royal Mail Service. Despatch within 3- 5 working days, delivery in 5-7 working days for orders under £50.00
• Northern Ireland, Highlands & Islands 1 - 25Kg £10.95 Courier service with signature. Despatch within 3- 5 working days, delivery in 7-10 working days
• Northern Ireland, Highlands & Islands 25Kg+ Price on request
• Channel Islands 0 - 2Kg (small jiffy) £5.95 Royal Mail Service Despatch within 3- 5 working days, delivery in 5-7 working days for orders under £50.00
• Channel Islands 1 - 25Kg £13.50 Courier service with signature. Despatch within 3- 5 working days, delivery in 5-7 working days
• Channel Islands 25Kg+ Price on request

UK Exceptional Delivery

• UK Mainland; Antifoul & paints £5.95
• UK Mainland; Inflatable dinghy £10.00
• UK Mainland; Liferafts £17.50
• UK Mainland; Flares £49.95
• Northern Ireland, Highlands & Islands; Antifoul & paints £9.95
• Northern Ireland, Highlands & Islands; Inflatable dinghy price on request
• Northern Ireland, Highlands & Islands; Liferafts price on request
• Northern Ireland, Highlands & Islands; Flares not available to ship at this time
• Channel Islands; Antifoul & paints £13.50
• Channel Islands; Inflatable dinghy price on request Channel Islands; Flares not available to ship at this time

For further delivery information click here.

Standard Returns

If you are not entirely happy with your purchase, we will exchange or refund your goods in full, provided that the items are returned within 14 days of receipt.*

Please check the condition of goods on arrival - we are unable to accept goods damaged during shipping after 14 days.

Returned goods must be packaged securely, with all original packaging undamaged and in a saleable condition i.e. shoe boxes must be in the same condition as when received.

Goods must be unused and security seals intact.*

If you would like to return goods because they were ordered incorrectly or if clothing does not fit, return postage will be at your expense. If you would like us to replace the goods with another size or colour, we will charge carriage on the replacement.

Please be aware that some navigational and safety products may be dated, and as such a full refund may in some cases not be possible. If you are purchasing dated navigational charts we suggest you contact us for more information.

Faulty Goods

If you receive your goods and believe them to be faulty, please contact us straight away with a brief description of the problem. If we require you to return the product for a replacement, we will send you a pre-paid Royal Mail label for delivery back to us. Unfortuantely we cannot send the courier back to collect the items.

Returning goods to Force 4 is easy!

• Please contact us by ringing 0345 1300 710 or email on [email protected] . This way we'll be able to determine whether you would like to return the product for a refund or whether you'd like to exchange the product. We are unable to process the return of faulty goods that we're not expecting.
• We'll then give you a returns number. This returns number will need to be clearly marked on the outside of your parcel so it can be identified on arrival. Please note, failure to mark a returns reference number on the outside of your parcel may result in a delay in processing your return.
• Don't forget your proof of postage, just in case!
• Once we receive the item we'll be able to proceed with a refund or an exchange.

*this excludes faulty goods with manufacturers defects. If goods are found to be faulty during use, after the returns period, please just give us a ring on 0345 1300 710 and we'll be happy to help.

Write a review for this product

Stock Alert

Please alert me via email when this product is back in stock.

Please read our privacy policy for more information about how we protect your personal data.

Men's Size Guide

“Nomad 2 is a portable AIS navigation solution from Digital Yacht. It is a class B AIS transponder with a wireless and USB interface built in for tablets and PCs. It ships with a compact combination VHF and GPS antenna.“

• Manuals & Downloads

Additional information

• What inside box
• Product Video

Description

Nomad 2 is supplied with a combo VHF/GPS antenna and has a built-in web interface for its configuration. The Nomad version 1 has a built-in GPS and is configured via ProAIS2, click here if you have Nomad 1.

Why does it show Weak Security / No wifi icon?

The WiFi icon on the iPhone not showing is the wireless network you are connected to, does not have an internet connection. This is a fairly recent change. On earlier versions of iOS this icon was always displayed and shows a user if they are using WiFi or 4G connection for internet, which is an important thing to know.

Most users will be connected to normal home or office wireless networks that have an internet connection. Only a small percentage of iPhone users will have an iAISTX or similar wireless device that does not have internet connection, so having a feature for the majority won the day.

The weak security message is also a recent change, as Apple are pushing all of their users to move to the latest and most secure WPA3 security. The reality is that WPA2 is still very secure and still used on the majority of wireless networks, so it is nothing to be worried about. Even if a hacker did manage to crack your iAISTX, all they would gain is the location of all the AIS equipped vessels around you – not any sensitive banking or personal info.

Can I use an external GPS for the iAISTX/PL & AIT5000 Transponder or do I have to use the supplied antenna?

In the original International Product Specification for Class B AIS Transponders, it was dictated that they should be “stand alone” systems that did not require any input from other devices. For this reason, you will not find any AIS Class B transponders that can take their position input from an external NMEA 0183 or NMEA 2000 GPS sensor.

I am afraid that you will need to use the supplied GPS antenna with your iAISTX, but if your boat has a GRP hull, then you might be able to install the GPS antenna inside the hull and not go to all the trouble of routing it externally. Just find a suitable location and use the GPS signal strength display on the iAISTX’s web interface to check that you are getting good reception, before finally bolting it down.

AIT2500/AIT5000 Disable NMEA 2000 Heading Reception

All Class B and Class B+ AIS transponders can transmit the True Heading of the vessel as part of the dynamic data they transmit to other vessels; MMSI Number, Position, COG, SOG, etc. If received most charting systems will plot the AIS target with both the COG and True Heading vector displayed, useful when the vessel is stationary and COG becomes unstable/inaccurate.

Our AIT2500 and AIT5000 units can receive the True Heading (HDT or THS sentences) data via their Low Speed NMEA 0183 Input (Yellow+ and Green- wires) or via PGN#127250 Vessel Heading on NMEA 2000.

However, not all NMEA 2000 systems will transmit True Heading and in some cases they transmit a wrong value or just a fixed 000º. This results in the AIS target being plotted with a very strange heading vector or the boat appearing to be moving side-ways or backwards.

If this happens and you cannot correct or suppress the True Heading value on the NMEA 2000 network, then you can stop the AIT2500/AIT5000 from receiving True Heading over NMEA 2000, by following the procedure below….

Using the proAIS2 software, go to the Serial Data tab and then copy and paste the following commands in to the box at the bottom of the page and click the “Send” button (see image below).

• To stop reception of True Heading data over NMEA 2000 send this command: $PSMT,0,3,0x2C75B2FA,1,n2kignss 0,0*13  
• To enable it again send this command: $PSMT,0,3,0x2C75B2FA,1,n2kignss 1,0*12  

….if the command was successfully received and actioned, you should see Transponder respond with…

• $PSMT,255……….etc .     (basically, the same as the command but 255 instead of 0 after the $PSMT, text)

AIS Transponder Status light flashing red

A flashing RED Status LED indicates a high VSWR reading or potentially a Power Amplifier fault.

For the flashing RED Status LED issue, with the 12v power turned off to the AIS Transponder, I would visually inspect the BNC antenna connector on the AIS and make sure there are no signs of connector damage. Then connect up whichever VHF antenna you have the most confidence in. Now power ON the AIS Transponder and immediately join its wireless network and bring up the web interface before the unit has got a GPS position fix and tried to transmit or use ProAIS2 if your AIS transponder don’t have a web interface.

Now watch the VSWR reading and see what value is displayed after the first couple of transmissions. If it is greater than 5:1, then it has a high VSWR and will soon start to flash the RED Status LED.

The most common cause is the VHF antenna and connections, but if you are confident that they are all fine, then it must be the unit itself and we will need to get it back for warranty repair.

AIS is not displaying names

When we get reports like this, it invariably turns out to be Chart Plotter or Application that has a problem – usually software related.

The reason for this, is that AIS units do not differentiate between different types of AIS messages; either the regular dynamic ones that include the MMSI number and the position/course/speed of the vessel or the more infrequently transmitted static ones that include the MMSI number, name, dimensions, boat type, etc. and in the case of Class A vessels the voyage data that includes navigation state, destination, ETA, etc.

An AIS unit either receives all of the messages or none. In theory, if the AIS was getting poor reception and missing some messages then because a boat might send 10 dynamic messages for every 1 static message, you are more likely to see the boat without the static data, but it would be random and some boats would have their names. The application only needs to receive the static data once for a target, and then it is in its temporary AIS database for the duration that the application is running.

As I mentioned, the Chart Plotter or Application maintains its own AIS database where it ties together the MMSI numbers in the dynamic and static messages and builds up an AIS target list where every boat should (within 6 minutes) have a name, dimensions, boat type, etc.

The static messages are longer than the dynamic ones and might be split across a couple of UDP network packets. You could try setting the iAISTX to operate in TCP mode and then setup a new Device on the Navionics App; TCP mode, Host = 192.168.1.1 and Port = 2000.

TCP mode is a guaranteed delivery protocol with error checking, packet sorting and re-transmit functionality, that ensures all network packets are always fully received. The downside, is that it is a one device protocol so you cannot have more than one device receiving the data at a time.

How to manually reset an AIT5000

This reset procedure just resets the AIT5000 unit’s wireless interface and does not reset the MMSI number, which can only be carried out by an authorised dealer/distributor.

With the AIT5000 unit fully powered up, locate the reset button, which is a small push button next to the wireless antenna. Press and hold this push button for > 10 seconds (recommend 15 seconds to be sure).

When you release, you should see the Wi-Fi and Data LEDs change flashing sequence slightly as the unit resets and reboots.

Once the AIT5000 has rebooted, all of the wireless and web settings will be back to the factory defaults – as detailed in the user manual.

You should now be able to see the AIT5000-xxxx wireless network again. Try to get one of your devices to connect and stay connected to the AIT5000 Wi-Fi connection.

My AIS Transponder is not transmitting

If you think that your AIS transponder is not transmitting your position then this procedure might help you. The first step is to check if your AIS transponder is actually transmitting. If you are then sure that your AIS transponder is not transmitting then the next part explains you the factors to check.

1 – Check if your AIS is transmitting or not

With proais2 or iaistx/ait5000 web interface.

Using the proAIS2 configuration software or the iAISTX/AIT5000 web interface allows you to see if the GPS position is OK. You can monitor the AIS reception of other vessels. As well as ensure that there are no errors or alarms. However, if you are new to AIS, there is always that nagging doubt as to whether other vessels are seeing you.

Check with a local AIS Receiver/Transponder

The best test of a Class B transponder is to ask someone else in your marina, who has AIS, to check that they are receiving you on their system. If your vessel is stationary, then a transponder will only transmit every 3 minutes. This increases to every 30 seconds when your speed over the ground (SOG) is greater than 2 knots. Therefore, do allow some time for them to detect you. Also when they first receive your transmission, the only data they will see is your position, speed, course and MMSI number. It can take up to 6 minutes to receive your “Static Data” (boat name, call sign, vessel type, dimensions, etc.). This is normal and is the way the AIS system regulates the amount of data being transmitted.

Check with MarineTraffic, Vessel Finders, etc.

The other increasingly common method of testing an AIS transponder is to look on one of the online “live” AIS websites and the most popular of the free services is MarineTraffic.com

However, it is important for you to be aware of the limitations of these online sites. As a result, do not assume that you will always be picked up by them. Each of the different online services are only as good as their network of AIS receiving stations. In many cases enthusiasts/volunteers operate these. In some areas the coverage is great but there are definitely “holes” in coverage.

2 – Find out the reasons why your AIS is not transmitting

If you are now sure that your AIS transponder is not transmitting then you should follow the following steps.

You must use ProAIS2 for your AIT1500, AIT2000, AIT2500, AIT3000 or Nomad. However, for the iAISTX, iAISTX Plus or AIT5000, you must use the built-in web interface.

With proAIS2’s diagnostics tab or the iAISTX/AIT5000 web interface, you can check if an AIS transponder has an issue or not.

A- Check if your AIS receives a good GPS position.

Without a good GPS fix, an AIS transponder cannot transmit correctly your position. By going to the GPS Status tab in ProAIS2, you can see the GPS reception. If you have one of our AIS transponder with built-in GPS antenna, then you should consider installing a GPS booster (for more information, click here ).

If you have an external GPS antenna then make sure that the connectors are correctly tight and also that the antenna is outside and has a clear view over the sky.

B- Check the VHF antenna

In the Diagnostics Tab in ProAIS2 or within the iAISTX/AIT5000 web interface, you can see the VSWR ratio. The VSWR ratio is explained in the FAQs. If your VSWR ratio is above 3, then you must check the VHF antenna connectors and the cable.

If possible, use another VHF aerial to check if the AIS transmits better.

C – Check that all the data have been entered

In the Configuration Tab in ProAIS2, you must make sure that all the boat details have been added (MMSI, VHF Call Sign, Name, Dimensions, etc.)

You can send us via email a screenshot of the ProAIS2 diagnostics tab or your iAISTX/AIT5000 web interface, we will then let you know whether the product works well or not.

This video might also help you out:

Connecting FM Radio to the VHF Splitter

A coax cable has an inner wire and then the braided shield and a quick and easy way is just to strip the cable back and solder or join using terminal block the Inner wire to the Orange wire and the Outer shield to the Green wire.

However, if you want to make a nicer, more robust solution, you could get one of these…

https://www.adafruit.com/product/2889

and one of these…

https://www.mouser.com/ProductDetail/AIM-Cambridge-Cinch-Connectivity-Solutions/CPMC-88-1?qs=atelM%2FHH1ECgOOZ43uoOSg%3D%3D

Then the Orange wire would go in the + screw terminal and the Green in the – screw terminal. The BNC connector would be crimped on to the coax cable and you end up with a much more longer lasting connection.

I cannot display AIS targets

If you encounter an issue with AIS showing on your display (navigation software or chart Plotter) then you should follow this procedure.

1 – Issue with a Chart Plotter/VHF Radio

If you cannot display AIS targets on your Chart Plotter or VHF radio, then follow this:

• If you have connected your AIS to your Chart Plotter/VHF Radio via NMEA 0183 wires , then you must make sure that you have used the NMEA 0183 38400 baud wires (Orange + & Brown – for Digital Yacht AIS Transponders). The second step is to check your Chart Plotter / VHF Radio settings. The best solution here is to check your product manual but you must make sure that the NMEA 0183 port is set at 38400 baud and also that AIS targets are activated.
• If you have connected your AIS to your Chart Plotter/VHF Radio via NMEA 2000 , then you must make sure that the NMEA 2000 network is working properly. This page might answer to your question. You should also make sure that AIS targets are activated in your chart plotter / VHF radio settings.

2 – Issue with a Navigation Software / App

If you cannot display AIS targets on your navigation software or app then follow this:

• For an Android/iOS app : The first step is to make sure that all apps are closed in the background, then you are connected to the product WiFi network. The second step is to configure your navigation app. This is explained in this page.
• For a PC Navigation Software: The first step is to make sure that the USB drivers are installed. You can download them here if needed. You must then find out the port COM allocated to your USB port. The last step is to configure your navigation software. This is explained in this page.

I don’t have a good AIS range

Ais transmission/reception depends on the ais class.

• A Class B AIS transponder transmit at 2 watts whereas a Class A Transponder at 12.5 watts . The Class B+ SOTDMA transponder transmits at 5 watts. This difference in power has a huge impact on the transmission range of each transponder.
• For a Class B AIS transponder, the transmission range is usually 5 to 7 miles in perfect conditions. This means using a good VHF antenna, placed as high as possible and clear of other antennas. The cables and connectors must also be in good conditions. For a Class B+ 5W SOTDMA, it typically transmits at up to 15 miles.
• However, for the AIS reception, a Class B/Class B+ transponders can receive Class A AIS at up to 30 miles.

If you don’t have a good range

• If you are using a VHF antenna splitter for your transponder, make sure it is a ZeroLoss VHF Splitter like our SPL1500, SPL2000. You must also check the connectors and the cables between the VHF splitter and the AIS.
• If you are using a dedicated VHF antenna for your transponder, then make sure that it is at least 2 meters away from other VHF antennas. Also, you must check the VHF antenna, its cable and connectors.

If you don’t have a good range, we suggest you testing with another VHF aerial to check if you have a better range.

I don’t receive NMEA data on an iPad/iPhone app

If you don’t receive the NMEA data on your iPad or iPhone, then you must follow this procedure:

1- Close all apps in the background or restart your device.

 Always a good idea to shut down your iPad/iPhone device and then power it back up again, as this will close all background apps and ensure all of the right services are running. For more information: https://digitalyacht.net/2018/07/27/background-apps-stopping-wireless-nmea-transmission/ 

2- Local Network Settings

If you are using iOS 14 or higher, make sure the “Local Network” privacy settings are enabled for the app they want to use….

Go to Settings>Privacy>Local Network and make sure that the App is in the list and enabled….

3 – UDP or TCP?

Check what mode/protocol our product is set to, TCP or UDP (check product manual) and ensure that you set the same type of connection in the App. If the device is set to UDP and you try to use TCP in the App it will not work, both the device and app must be set to the same mode/protocol TCP or UDP. For TCP connections you need to enter an IP address of 192.168.1.1 and Port 2000, while for UDP you need to enter 0.0.0.0 and Port 2000, or if this fails try 192.168.1.1

4- App configured?

You must make sure that your app is configured. You should look at our section How to Configure Apps & Software to find out how to configure your navigation app.

5- GPS Settings

If you want the app to use the GPS data from the wireless connection, then go to Settings>Privacy>Location Services, on your iOS device and set the App to “Never” which will force the App to use the GPS position from the wireless connection, rather than try and use its internal GPS or even worse “Assisted GPS” if it is a Wi-Fi Only iPad.

How to manually reset an iAISTX?

This reset procedure just resets the iAISTX unit’s wireless interface and does not reset the MMSI number, which can only be carried out by an authorised dealer/distributor.

To reset the iAIS TX, you must open the product case by removing the 4 screws from the unit.

Once the screws have been removed, the base should be carefully disengaged from the top of the case using a small flat blade screwdriver.

There are interconnecting cables between the top and bottom of the case, so take care not to separate the two parts completely.

There is only one PCB inside and the PCB diagram is shown below with the JP1 connector that you need to short in red…

With the unit’s 12/24v DC power on, short the two pins of JP1 for at least 10 seconds (allow 15 seconds to be sure).

Once the iAISTX has rebooted, all of the wireless and web settings will be back to the factory defaults – as detailed in the user manual.

You should now be able to see the iAISTX-xxxx wireless network again. Try to get one of your devices to connect and stay connected to the iAISTX Wi-Fi connection.

Why my boat does not appear on MarineTraffic, VesselFinder, etc.?

• It is important for you to be aware of the limitations of these online sites. As a result, do not assume that you will always be picked up by them. Each of the different online services are only as good as their network of AIS receiving stations. In many cases, these shore stations are operated by AIS enthusiasts/volunteers who have a home/office by the sea. In many areas the coverage is great but there are definitely “holes” in coverage.
• One of the good features of the Marine Traffic service, is that you can display the locations of the receiving stations and see if they are currently online or offline. From the Marine Traffic home page, zoom in to your location on the map. Then on the left hand side of the screen, click on the “Layers” icon. This will show a series of tick boxes to display different layers of data will appear. Click the “Stations” tick box and you will see a series of Antenna type icons on the map; green if they are online (receiving data), red if they are offline and orange if they are online but giving poor reception performance.
• In the image below, you can see the the UK port of Exmouth. If you were testing your Class B transponder here today, then you would think you were not transmitting. Just one receiving station being offline can create a big hole in coverage and the next receiving station going East is Bridport around 35 miles away. This is a popular section of water and yet you can only see a few vessels between Torquay and Lyme Regis.

• A Class B transponder transmits at 2 Watts (about a third of the power of a hand held VHF). Therefore even in perfect line of sight conditions, the best range you can expect is about 8NM. It is important to check if there is a receiving station within 5-8NM of your location and if there are any other Class B vessels displayed near you.
• If you are more than 5-8NM from the receiving station or there is not a good clear line of sight between the station and your location, then your transmission is unlikely to be received.
• You should note that Commercial vessels and some larger pleasure craft have Class A Transponders. These transmit at 12.5 Watts and have a much greater transmit range 20-25NM. As a result, these vessels may be displayed near your location, even if your Class B transmission is not received.
• Finally, it can take an hour or so for a new AIS (MMSI number) to be recognised and stored in the database of these online services. Consequently, if you are confident that you are in range of an online receiving station, leave your transponder on for a few hours. This will give the online service time to detect and record you in their database.

ADDITIONAL NOTE

Another nice feature of Marine Traffic, is that you can drill down in to the details of a particular receiving station. Click on the icon of the Station of interest and a summary of the receiving Station’s information will be displayed. By clicking the Green “Details and Statistics” button, you can get a wealth of information about the station, its statistics and “live” AIS target reception list.

• As you can see, this particular station in Exmouth is regularly offline for quite long periods. Even when it is online, it has a rather poor 10NM reception range.
• For anyone that lives or has a business close to the sea and who would like to be part of an online AIS network, please contact us about our AISNet product, which can connect to your home/office network and put your local AIS reception data online.

Which VHF antenna for an AIS?

One of the most common questions we are asked by our AIS customers, is “what antenna should I use for my AIS ?”, so we thought we would post a short article to provide an answer on VHF Antenna Options for AIS.

Basically there are two VHF antenna options for AIS; fit a second dedicated VHF antenna a suitable distance from the vessels main VHF antenna. Or alternatively, use the main antenna for both VHF and AIS by fitting a special device called a “Splitter”.

Generally our recommendation for yacht owners who want to fit an AIS, is to use a “Zero Loss” splitter like our SPL2000. By utilising the main VHF antenna at the top of the mast, you will definitely get maximum transmit range. Plus the ease of installation often makes it a cheaper option than paying for a second antenna to be installed.

However, for power boaters who do not benefit from the height advantage of using the main antenna at the top of the mast. As well as for AIS receiver owners where the splitter can often cost more than the AIS receiver itself. It is often desirable to fit a second VHF antenna. This is particularly apparent if you intend to save money by doing the antenna installation yourself.

AIS operates on two dedicated channels within the marine VHF frequency range – 156.0 to 162.025 MHz. The two AIS channels are at the top end of this range namely; 161.975 and 162.025 MHz (channels 87B and 88B). Most VHF antennas are designed to give maximum gain across the whole VHF frequency range centred on Channel 16 (156.8 MHz).

Pretty much all of the antenna manufacturers now produce “AIS Tuned” antennas. These have their centre frequency shifted from Channel 16 to 162Mhz (exactly half way between the two AIS frequencies). If you choose to mount your AIS antenna on the stern rail of a yacht or radar arch of a power boat. Then using an “AIS tuned” antenna is a good idea. This will allow you to get an extra bit of gain. Thus compensating for the antenna being effectively at deck level.

The graph above shows how the tuning of the antenna to 162MHz gives it an extra boost in VSWR (gain) across the two AIS frequencies.

Which ever option you choose, having AIS on your boat will without doubt make your sailing experiences safer. As well as less stressful in poor visibility or when crossing busy shipping lanes. Even a simple receiver with a small whip antenna at deck level is effective. Allowing you to keep informed of what ships are around and which ones you need to keep an eye on.

AIS + VHF Antenna Separation

The AIS system works on two channels in the VHF frequency range and in order to receive or transmit AIS information it is necessary for the AIS unit to be connected to a VHF antenna. One option is to fit a VHF splitter such as our SPL2000, which allows both the VHF radio and the AIS to use the boat’s main VHF antenna. The other option is to fit a second VHF antenna which is then just connected to the AIS.

Any VHF antenna can be used, although some antennas are “AIS tuned” to get maximum gain on the two AIS channels and also have a BNC type connector fitted (common on AIS units), rather than the traditional PL259 VHF connector.

If you decide to fit an additional VHF antenna for the AIS, you want to mount it as high as possible but you should be aware that it cannot be mounted right next to the existing VHF antenna and a certain amount of separation must be maintained to avoid the 25 watts of transmit power from your VHF radio going straight in to the AIS receiver circuitry, potentially damaging it. The diagram below shows the recommended minimum separation of the antennas.

No GPS on Transponder due to loose FME connector

Our AIS transponders are supplied with a GPS antenna that has a 10m cable terminated in an FME connector (right hand connector in the above image).

These connectors are very slim, not much larger than the coax cable and are much easier to route through the boat. We also supply an FME to TNC adaptor for connecting the cable to the transponder (left hand connector in the above image).

Today we were reminded of the importance of ensuring this adaptor is firmly screwed on to the cable, when a US customer reported that their AIT2000 had stopped getting a GPS fix. After using the proAIS2 software to confirm that the GPS signals were very low, we asked the customer to check the GPS antenna connections to the AIT2000 and sure enough found that the FME connector had become loose and was no longer making a good connection.

A quick tighten of the FME connector in to the adaptor and the AIT2000 started to get a GPS fix again and the customer could continue their cruise.

The nut on the FME connector is 8mm (AF) and the TNC adaptor has two flat indents that are 9.5mm (AF). You can tighten the two connectors quite tightly but avoid using too much force which could damage the connector and cause a different set of problems. The image below shows the FME fully tightened in to the adaptor and there should be about a 1.5mm gap between the FME nut and the collar of the adaptor when properly tightened.

Our GV30 combo GPS and VHF antenna also uses FME connectors and is supplied with a TNC and BNC adaptor, which should also be tightened in the same way.

What’s the VSWR?

Checking the VHF/AIS Antenna, is the most difficult test. As a result, it is the one that we get the most technical support calls about. Therefore, we thought a blog post on the subject would help.

It is surprisingly common for yacht owners to install an AIS transponder with an antenna splitter and then find that their “old faithful” VHF antenna at the top of the mast is actually not as good as they thought it was. The reason for this, is that the top of the mast is a pretty hostile place. Over time, the antenna will suffer high levels of salt water and UV exposure, coupled with large temperature swings, vibration, G forces, etc. All of which start to degrade the materials and cabling. Alongside the occasional stepping of the mast, with possibly a through-deck connection or cable join inside the hull. You can see that there are lots of possibilities for the antenna to not be in tip-top condition.

All AIS transponders perform a continuous series of self tests, including a VHF antenna test. This is often the first time, in many years, that the VHF antenna at the top of the mast has been tested. Therefore, it is not unusual for some to fail the test. The reality is, that a VHF radio or AIS will happily get some level of reception even if you just connect a wire to it. As a result, you can appear to be receiving AIS data but your transmission is poor. This is due to an old/degraded VHF antenna that has a high Voltage Standing Wave Ratio (VSWR).

The VSWR of an AIS transponder, is a measure of the level of standing waves present in the antenna cable (feeder). Standing waves are the signals/power that do not radiate in to the air, by the antenna (load), but reflect back down the cable to the transponder (source). In an ideal world, all of the power sent to the antenna would transmit through the air to other vessels. However, this only happens if the impedance (AC resistance) of the source, feeder and load are identical (50 ohms).

This perfect matching of the impedances would result in a VSWR of 1:1. Although in “real life” pleasure boat installations, it is more likely to be between 1.1:1 and 2.5:1. In the diagnostic page of our proAIS2 software, the  you can see the VSWR and will update upon every transponder transmission. By keeping an eye on the Transmit Counter you can see when a transmission takes place. You will probably see a slight change (in the decimals) each time the VSWR is measured, which is normal. If you see a bigger fluctuation, this is indicative of a poor connection or water ingress in the antenna cable/connections.

If the measured VSWR goes above 5:1, the RED Status LED will illuminate and a VSWR alarm displayed in proAIS2 (see top image).

Understanding the importance of having a good VHF antenna, with a low VSWR to get the best possible AIS transponder performance (transmit range) is key. We hope this article helps our customers have a better appreciation of this technology.

How to change the MMSI number?

Dear Customer,

Once entered and confirmed, the MMSI number on an AIS can only be changed by a technical dealer or by Digital Yacht.  This is a government requirement in many countries to ensure the security of the AIS system.

If you need your MMSI number reset or changed, we offer a reprogramming service.

The cost for this is £45.00/60€ + Return Shipping + VAT. 

If you would like to go ahead with this, please complete and print this AIS PROGRAMMING form with vessel details. If you do not have Microsoft Word or a means of editing Word documents, please print and complete this PDF version .

Please return the AIS transponder with the printed AIS PROGRAMMING form to the following address:

• USA/UK/ROW: Digital Yacht Service, 7 Farleigh Court, BS48 1UR, Flax Bourton, United Kingdom
• Europe/EU: Digital Yacht, 12 Boulevard des Belges, 76000 Rouen, FRANCE

If you’re returning a product from outside the EU, please put a value of GBP £10.00/ USD $14.00 / EUR €12.00 for the product and if requested by the freight company or postal service, use MARINE ELECTRONIC EQUIPMENT as a description and the commodity code 90148000.

The reason for return can be Product Service or Return for Repair.

Alternatively, the MMSI can be reset by any local NMEA certified/technical marine dealer who will have the cables, programming leads and software to complete.

For Nomad 2 customers, please contact us via our ticketing system.

What is the wireless interface range?

The Wi-Fi will typically footprint a boat up to 25m LOA. Contact us if you need a bigger footprint or have a steel or carbon vessel.

I have already a Wi-Fi router on board – can I join the product Wi-Fi to an existing network?

Yes! You can program this through the web interface so you just have one Wi-Fi network on board with our product linked directly to your other Wi-Fi network as a client.

This is explained in your product manual.

This works well as well with Furuno WiFi radar installations.

How to configure a navigation app or software?

We keep on our blog a list which explains how to configure all the popular navigation apps & software. This list explains how to configure a NMEA connection (UDP/TCP) on the app/software but also how to configure the AIS settings.

To see the list, please click here.

How many devices can connect?

Up to 7 devices can connect using UDP. TCP/IP is a one to one connection format. PCs, MACs, Android, Linux and iPhone/iPad are all compatible.

What is the AIS transponder Wi-Fi network password?

Our AIS transponders with a built-in web interface create a password protected WiFi network. With your tablet, PC or smartphone, if you scan for wireless networks, you should see a wireless network called “DY-AIS-xxxx” or “IAISTX-XXXX” where xxxx is a four-digit code unique to your AIS transponder. The name of the WiFi networks might change according to the product version.

Make your device join this network and you will be asked to enter a password which is “PASS-xxxx” where xxxx is the same four-digit code as in your network name. You can change both the network name and password in the AIS transponder unit’s web interface.

For instance, if you have an AIT5000 and the WiFi network name created is DY-AIS-D4B7 then the WiFi network password is: PASS-D4B7

How to configure the AIS transponder with the web interface?

In order to facilitate the use and configuration of our AIS transponders, our new AIS transponders now have a built-in web interface. This is the case for the iAISTX, iAISTX Plus and AIT5000 (since March 2020). These devices create a WiFi network on board and configure themselves by connecting to WiFi.

The configuration of the transponder can therefore be done through a computer, a tablet or even a smartphone and most importantly, no software is required. Our other transponders can only be configured through a computer by connecting the USB and downloading a specific software (ProAIS2).

After installing and powering the device, here is the procedure to configure the AIS transponder through the web interface. The screenshots below use our old built-in web interface version.

1 – How to access the web interface

You need to connect to the WiFi network created by the AIS transponder (network name: DY-AIS-xxxx) . If the WiFi network has a password, then the password is: PASS-xxxx (xxxx is a 4-digit code unique to your device and is the same as the 4 digits on the WiFi network name).

Then, open a web browser (Safari, Chrome, Firefox, Edge, etc.) and either enter the IP address of the transpondeur…

http://192.168.1.1

…or if your device supports Bonjour/mDNS you can enter the following URL…

http://dy-ais.local

2 – Vessel details

This is the section in which you enter the MMSI and Static data to program the transpondeur. The MMSI number can only be programmed once, so particular care should be taken to check that it is correctly typed in. All other data can be changed at any time. You need to enter your boat dimensions and an approximative location of the GNSS antenna.

Once you are happy that all your boat’s static data has been entered correctly, remembering to double check the MMSI number, click the “Update Vessel Details” button and the details will be stored in the AIS unit.

3 – Vessel details

By default, the AIS transponder is in “Access Point” mode, that means it creates its own password protected wireless network and automatically provides network settings to any device that connects to it (via DHCP). You can change the default network name and password, if required, and the wireless channel that the unit uses (Channel 1 by default). For the rest of the network settings, we recommend that you do not change anything.

If you want to merge the AIS’s WiFi to an existing WiFi network on board, please read the unit manual.

Once everything is configured for the network settings, click on “Update Settings” button and the unit will save the new settings and restart (it takes about 30 sec).

4 – AIS Status and Silent Mode

If you want to merge the AIS’s WiFi to an existing WiFi network on board, please read the unit manual which you can  download from here.

5 – View NMEA data and product firmware

Thanks to the web interface, you can also display the NMEA 0183 frames broadcast by the WiFi of the AIS transponder. You have to click on the “View data” button at the top of the web interface. If you have connected instruments to the NMEA 0183 input of the AIT5000, you will also be able to see the data of these instruments in this page.

At the bottom of the web interface, you can update the product when an update is available. Simply select the file in your computer or tablet with “Choose File” and then click on “Upload Firmware”.

AIT2500/AIT5000 – Disable NMEA 2000 GNSS PGNs

If you need to disable the GNSS PGNs that the AIT2500/AIT5000 outputs then this is the procedure to follow….

• To disable GPS data output over NMEA 2000 send this command: $PSMT,0,3,0x2C75B2FA,1,n2kognss 0,0*15
• To enable it again send this command: $PSMT,0,3,0x2C75B2FA,1,n2kognss -1,0*39

How to install the AIT5000?

This video will show you how to install our  AIT5000 Class B+ AIS Transponder  for NMEA 0183 & NMEA 2000 based systems.

To configure the AIT5000, you need to configure the AIT5000 with its built-in web interface.

Nomad 2 User Manual V1_11

• Nomad Class B Transponder
• 3db Wifi Antenna
• Integrated USB (Type A) Power Data Cable
• GV30 Combination Ais/Gps Antenna With 5m Cable And Connectors
• Instructions

Related products

AISNet with built-in VHF Splitter

SPL1500 – VHF/AIS Antenna Splitter

Pilot Plug USB Cable

Everything For Your Outdoor Adventure!

Login to my account

Enter your e-mail and password:

New customer? Create your account

Lost password? Recover password

Recover password

Enter your email:

Remembered your password? Back to login

Your cart is empty

Digital Yacht Nomad 2 Portable AIS w/GV30 [ZDIGNMD2]

Description.

Nomad 2 Portable AIS with GV30

Nomad 2 is a portable AIS transponder from Digital Yacht. Designed for recreational boaters and professional mariners, it offers a full-function Class B AIS transponder with a wireless and USB interface built in for tablets and PCs—all in a portable, compact package.

It incorporates an innovative USB power solution, therefore allowing the Nomad to be powered from any standard USB source. This can include low-cost 3rd-party battery packs, a USB PC connection, or 12V USB adaptors/cigarette lighter adaptors. It ships with a compact combination of AIS and GPS antenna, which allows the main unit to be used below decks on all types of vessels – leisure, and commercial.

It addresses the needs of so many boaters who want a portable yet sophisticated navigation solution with AIS and GPS and the ability to interface with tablets, PCs, and smartphones. It appeals to charter skippers, professional mariners like delivery skippers and pilots, as well as boat owners who don’t want the hassle or cost of installing a dedicated transponder and like the concept of easy iPad and tablet navigation using their favorite charting apps with a detailed AIS overlay and real-time GPS positioning. As a full-function Class B transponder, it also sends the boat position to other AIS users.

Nomad 2 has a built-in wireless interface for outputting GPS position data and AIS. It’s designed for use with an iPad, tablet, phone, or PC in conjunction with any compatible charting app or program—Navionics, NavLINK, Weather 4D, AquaMap, Imray, SailGrib, and 100’s more.

The unit can also act as an AIS/GPS receiver only if MMSI and specific boat data are not available.

Configuration

Nomad 2 has a built-in web interface. The configuration of the transponder can be done through a computer, a tablet, or even a smartphone, and most importantly, no software is required.

You can configure the Nomad 2 through its simple web interface. Just open the web browser, enter the Nomad 2’s IP address, and users can configure the vessel details (MMSI number, boat name, etc.), network name, and password, and even merge the AIS’s WiFi to an existing WiFi network on board. So no complicated programming software or app is required.

You can even view the received NMEA data in the web browser for easy fault-finding. Finally, Nomad 2 supports TCP and UDP network protocols for maximum compatibility with apps.

• The perfect AIS solution for charter users, rental boats, delivery skippers, pilots, commercial users, etc.
• Full-function Class B transponder (send and receive AIS)
• Supplied with a combination GPS-VHF antenna that has an industry standard 1” threaded mount – suitable for many 3rd party deck, rail, and pole mounts
• Integrated wireless and USB interfaces – compatible with 100s AIS-ready charting apps
• USB powered
• Easy programming and control through a wireless web interface – no apps required
• Silence transmissions via the web interface
• Supports up to 7 connected devices
• Creates its access point and also can join an existing wireless network if required

Specifications:

• Weight: 1200 g
• Dimensions: 245 × 165 × 100 mm

What’s inside the Box?

• Nomad Class B Transponder
• 3db Wifi Antenna
• Integrated USB (Type A) Power Data Cable
• GV30 Combination AIS/GPS Antenna With 5m Cable And Connectors
• Instructions
• AIS Class: B
• Antenna Included: Yes
• Box Dimensions: 4"H x 10"W x 13"L WT: 3.5 lbs
• UPC: 703791696635

Estimate shipping

Refund policy.

Returns Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

Several types of goods are exempt from being returned, such as Gift cards, Downloadable software products and health and personal care items.

To complete your return, we require a receipt or proof of purchase.

Please do not send your purchase back to the manufacturer.

There are certain situations where only partial refunds are granted (if applicable) such as items with obvious signs of use. Any item not in its original condition, is damaged or missing parts for reasons not due to our error. Any item that is returned more than 30 days after delivery

Refunds (if applicable) Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.

Late or missing refunds (if applicable) If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at [email protected].

Exchanges (if applicable) We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at [email protected] and send your item to: 121 W. Hwy 98 Port Saint Joe Florida US 32456.

Shipping To return your product, you should mail your product to: BlueWater Outriggers Returns, 252 Marina Dr. Port Saint Joe Florida US 32456

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We can't guarantee that we will receive your returned item.

California Warning

WARNING: Cancer and Reproductive Harm:  https://www.p65warnings.ca.gov/products-places

You may also like

Customer reviews, recently viewed.

• Opens in a new window.

digital yacht ais 1000

• Digital Yacht

Username or email address  *

Password  *

Lost your password? Remember me

AUTOMATIC IDENTIFICATION SYSTEM (AIS)

What is AIS?

Automatic Identification System (AIS)  is the name given to an international maritime communications protocol developed back in the late 90s. AIS is now one of the most widely used and significant navigation safety technologies since the introduction of radar. The system was originally developed as a collision avoidance tool to enable commercial vessels to ‘see’ each other more clearly in all conditions and improve the helmsman’s information about his surrounding environment.

AIS uses GPS and VHF radio technologies to automatically communicate between vessels allowing vessel identity, position, course and speed (and other data) to be shared to other AIS users within range. These could be vessels, aircraft, coast stations or satellites. A single AIS transmission (message) can contain up to 27 pieces of information and can be used to carry numerous different types of data.

AIS forms an important part of a toolbox of aids to navigation. Information received via AIS can supplement and improve radar information and therefore is a valuable aid to assist in collision avoidance. It’s affordable, easy to install and also easier to interpret for leisure users compared to small radar systems. An AIS transponder is a mandatory fit on all vessels greater than 300 tonnes or carrying 12 or more passengers.

If you want to learn more about AIS, please click on the button below

Benefits of AIS

CPA and TCPA

Most navigation system can calculate the Closest Point of Approach (CPA) of every AIS target and also the Time to CPA (TCPA). The navigation system can trigger an audible and visual alarm when dangerous targets are detected.

See around corners

Useful to see around corners vessels, AtoNs, rescue Craft, etc. AIS is a low power and low cost alternative to radar for small boats.

Identification

Receive MMSI number, vessel name and boat type of all AIS equipped vessels. Useful to find any of your friends’ boats.

Collision Avoidance

Receive clear and regular position reports of all AIS equipped vessels in your area. You can identify and make a DSC radio call to a dangerous vessel using their MMSI number.

Emergency services and port authorities are using AIS for surveillance, safety with quick and easy vessel identification. Also, your friends and family can use online AIS services to track your trip/race from home.

Types of AIS

Digital Yacht’s extensive range of AIS products provides solutions for every type of boat, from an open cockpit RIB to a SOLAS Super Tanker. An AIS which sends and receives data is known as a  transceiver (or often called a transponder) . There are also simple devices called  AIS receivers  which pick up transmissions and decode for displaying on a compatible chart plotter or PC based navigation system – or even an iPad or tablet.

TRANSPONDERS

• Class B AIS Transponder
• Class B+ 5W AIS Transponder
• Class A AIS Transponder

Class B AIS Transponder  is for recreational craft installation and is a simplified, lower powered 2W transceiver which is normally a black box and uses a connected chart plotter to display local AIS targets. It transmits every 30 seconds regardless of vessel speed and can’t transmit additional data like destination port.

Class B+ AIS   Transponder  (also called Class B SOTDMA) is a new standard that utilises SOTDMA format transmissions which offer a 5W power output (2.5 x more powerful than a regular Class B), a guaranteed time slot for transmission in busy traffic areas and faster update rates depending upon the speed of the vessel. It’s ideal for ocean sailors requiring the best possible performance and future proof satellite tracking applications, fast power boats and smaller non-mandated commercial vessels.

Class A AIS Transponder  must have a dedicated (and type approved) display to show the location of nearby AIS targets and transmits at 12.5W. Data is sent at up to every 2 seconds depending upon the vessel speed and the display also allows for data to be inputted to the transmission such as vessel destination. A Class A device is normally used on commercial vessels as its Type Approved to IMO specifications.

If you don’t know which AIS transponder or receiver to choose, then you can fill in this questionnaire, which will recommend a model for you.

TYPES OF AIS

• AIS base stations

ATON (Aids To Navigation)  is an AIS transceiver specifically for use on marine infrastructure and buoys to provide real time hazard alerts as well as live monitoring data such as weather, sea and lantern status. ATON transmissions can be displayed on compatible chart plotter and ECDIS systems and allow a buoy or structure to be positively identified as well as the ability to display local wind, tide or metrological data.

AIS SART (Search And Rescue Transmitter)  is a homing beacon designed for use in an emergency. When activated an AIS SART transmits its GPS position using AIS in a special SART message. This message is recognised by the AIS display systems on other vessels (and potentially on shore) as an emergency message and generates an alarm.

An AIS SART can be used to locate a life raft or lifeboat in an emergency situation. Available in vessel versions (SART) or personal versions (PLB) with the difference being size and range. An AIS SART with its position close to the waterline and limited 2W output would typically have a maximum range of 5-6NM. A PLB device would typically have a range of 2-3NM.

AIS base stations  are fixed (non-mobile) stations that port authorities use to monitor and control vessel traffic. Major ports and harbours install these systems to give additional control over local AIS users. These base stations can also control other AIS devices with the ability to turn other AIS devices on or off, reserve time slots for special transmissions, control which time slots mobile AIS devices use and even control the power level of AIS transponders.

Digital Yacht also manufacture many accessories

Such as AIS alarms, interfaces for AIS and Zero-Loss VHF antenna-splitter allowing the VHF antenna to be shared with an AIS receiver/transponder and with a VHF radio.

Discover our products

The most extensive AIS Receiver range of any Marine Electronics manufacturer, with a model to suit every application.

Transponders

Our range of AIS transponders include Class A, Class B and Class B+ units for Commercial and Pleasure vessels.

Splitters & Antennas

All our VHF antennas and Zero Loss VHF splitters for any AIS receivers and transponders.

• AIS Beacons

Our AIS Beacons products such as an AIS Sart, an MOB beacon and an AIS alarm box.

• Accessories

Our AIS accessories such as AIS internet base station, passive GPS antenna and interfaces for Class A AIS

• Automatic Identification System (AIS)
• PC on Board
• Portable Navigation
• AIS Receivers
• AIS Transponders
• VHF Splitters & Antennas
• AIS Accessories
• Multisensor
• NMEA to WiFi Servers
• NMEA Interfaces
• NMEA 2000 Cables
• SeaTalk Interfaces
• USB Interfaces
• 4G/5G Internet Access
• Hi Power Long Range Wifi
• PC Accessories
• TV Antennas
• PC Software
• Android Apps
• Antenna Mounts
• Connectors + Adaptors
• Instruments
• PC Navigation
• Internet Access
• Get Support
• Product Manuals
• Tech Support Notes
• Product Firmware
• Software and utilities
• USB Drivers
• WLN10 & WLN30
• Products with NMEA2000 interface
• How to configure apps & software?
• Product Registration
• General News & Events
• Product Information
• Applications
• Product Pictures
• Product Guide
• Login / Register

We value your privacy

Privacy overview.

azteca yacht cost

• Published on September 24, 2023

The Complete Russia Digital Nomad Visa Guide (Updated 2024)

Is there a digital nomads in russia .

Certainly! It is indeed feasible to acquire a digital nomad visa in Russia. The process involves applying for a tourist visa tailored explicitly for digital nomads who wish to work remotely while residing in the country.

WHAT EXACTLY IS A DIGITAL NOMAD VISA?

A digital nomad is an individual who conducts their work remotely from any location, utilizing technology to perform their job. They can travel and frequently change their work environment, whether coffee shops, libraries, coworking spaces, or other places with an available Wi-Fi connection. Some digital nomads opt to stay in one location briefly before moving to new destinations, while others constantly switch cities or countries to experience different places while working.

REMOTE WORK VISA OVERVIEW IN RUSSIA

Following the outbreak of COVID-19, remote work, also called telework or telecommuting, gained significant significance in Russia. As a result of the lockdown measures enforced from the end of March to mid-May 2020, most companies mandated their employees to work from home. As a consequence, over two-thirds of the Russian workforce engaged in telecommuting during that specific timeframe. Overall, Russians perceived the opportunity to work remotely as convenient and advantageous.

FORMALITIES TO OBTAIN A DIGITAL NOMAD IN RUSSIA

There are several procedures and requirements to consider when planning to work remotely from Russia. Our team of attorneys in Russia can effectively handle all the legal aspects related to documentation in Russia. Here are some key points:

• To obtain a digital nomad visa in Russia, the initial step is to apply for a tourist visa.
• You must provide an invitation letter from a Russian citizen or an officially authorized travel company. The Russian authorities must approve this document to proceed with the application for a digital nomad visa.
• A valid passport is essential at the time of application.
• Once the necessary documents are accepted and the visa for Russia is issued, you must register with the local police station nearest your residence.
• It is also necessary to demonstrate a stable source of income to support your stay in Russia.

Considering these formalities, we emphasize that our experienced lawyers in Russia can handle these procedures efficiently if you choose to utilize our legal services. We are well-equipped to assist you in obtaining a digital nomad visa in Russia.

BENEFITS FOR DIGITAL NOMADS IN RUSSIA

• Average broadband internet speed in Russia: around 65 Mb/s
• Mobile internet speed in Russia: exceeds 20 Mb/s
• Income to live in Moscow: approximately USD 2,414 per month
• Monthly rent in Moscow: around USD 826 (including most utilities)
• National currency: Ruble (Exchange rate: 1 Euro ≈ 62 Rubles, 1 Dollar ≈ 64.62 Rubles)
• Cost of the internet: around USD 6 per month
• English proficiency: English can be used in Moscow and other major cities in Russia, in addition to Russian.

VISA EXEMPTION IN RUSSIA

Nationals of Belarus and South Ossetia can enter Russia and remain there unlimitedly. 

• El Salvador*
• Estonia (holders of an alien passport)
• Latvia (holders of a non-citizen passport)
• Saint Kitts and Nevis*
• Saint Vincent and the Grenadines*
• South Africa*
• United Arab Emirates
• South Korea
• Bosnia and Herzegovina
• Macao (Persons holding a Macau Special Administrative Region passport)
• North Macedonia*
• Hong Kong (Persons holding a Hong Kong Special Administrative Region passport)

TYPES OF VISA IN RUSSIA

• Russia Diplomatic Visa This type of visa is granted explicitly to foreign individuals who possess a diplomatic passports, such as heads of state, heads of government, and members of official delegations, among others.
• Russia Service Visa This visa is granted to individuals who hold a service passport (consular, official, unique) and includes members of official delegations, administrative and technical staff, and service personnel of diplomatic missions, among others.

Russia Ordinary Visas

• Russian Private Visa – This visa is provided to individuals who are visiting Russia for a brief period and have obtained an invitation letter as the basis for their visit.
• Russian Business Visa – This visa is granted to individuals traveling to Russia for business purposes.
• Russian Tourist Visa – Travelers with an invitation letter from a Russian tour operator can receive this visa .
• Russian Student Visa – This visa is granted to individuals traveling to Russia intending to pursue studies or educational purposes.
• Work Visa – This visa is provided to foreign individuals who desire to travel to Russia for a specific duration for employment.
• Russian Humanitarian Visa – This visa is issued to foreign nationals visiting Russia for scientific, cultural, political, or sports activities. It is also applicable for religious interactions, pilgrimage, charity work, or the delivery of humanitarian aid.
• Russian Transit Visa – This visa is provided to individuals who require transit through Russia’s territory to reach their final destination country.
• Russia Exit Visa – Foreign individuals in Russia whose visa is set to expire before their departure must obtain an Exit Visa to facilitate their release.

Where to Stay in Russia

Conclusion :.

In conclusion, Russia offers various visa options for different travel purposes, including the popular digital nomad visa. The country provides benefits such as fast internet, affordable living costs, and English proficiency in significant cities. Visa exemptions are available for nationals of certain countries. It’s important to note the different types of visas, ranging from diplomatic and service passports to ordinary visas for business, tourism, study, and employment. The Russia eVisa is also available for shorter visits to the Russian Far East region.

• Digital Nomad Visa

Share this Blog:

Post a comment cancel reply.

Save my name, email, and website in this browser for the next time I comment.

Justin Gonzalez

Currently in, related posts:.

Affiliate Links

Lorem ipsum dolor sit amet, consectetur adipisicing elit sed.